Hoi,
Ik probeer mijn edgerouter IPv6 adressen uit te laten delen op mijn LAN.
Echter lukt dit niet. Ook na verschillende fora topics bekeken te hebben en aanpassingen gemaakt krijg ik niet het gewenste resultaat.
Mijn Edgerouter ontvangt wel een IPv6 adres van het DSL Modem (experiabox 10).
De huidige config heb ik bijgevoegd, weet iemand waar het mis gaat?
firewall {
all-ping enable
broadcast-ping disable
ipv6-name WANv6_IN {
default-action drop
description "WAN inbound traffic forwarded to LAN"
enable-default-log
rule 10 {
action accept
description "Allow established/related sessions"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
ipv6-name WANv6_LOCAL {
default-action drop
description "WAN inbound traffic to the router"
enable-default-log
rule 10 {
action accept
description "Allow established/related sessions"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
rule 30 {
action accept
description "Allow IPv6 icmp"
protocol ipv6-icmp
}
rule 40 {
action accept
description "allow dhcpv6"
destination {
port 546
}
protocol udp
source {
port 547
}
}
}
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address 192.168.2.2/24
description Internet
dhcpv6-pd {
pd 0 {
interface eth1 {
host-address ::1
prefix-id :1
service slaac
}
prefix-length 48
}
rapid-commit enable
}
duplex auto
firewall {
in {
ipv6-name WANv6_IN
name WAN_IN
}
local {
ipv6-name WANv6_LOCAL
name WAN_LOCAL
}
}
ipv6 {
address {
autoconf
}
}
speed auto
}
ethernet eth1 {
address 10.0.0.1/23
description Local
duplex auto
ipv6 {
dup-addr-detect-transmits 1
router-advert {
cur-hop-limit 64
link-mtu 0
managed-flag false
max-interval 600
other-config-flag false
prefix ::/64 {
}
reachable-time 0
retrans-timer 0
send-advert true
}
}
speed auto
}
ethernet eth2 {
address 192.168.2.1/24
description "Local 2"
disable
duplex auto
speed auto
}
ethernet eth3 {
disable
duplex auto
speed auto
}
loopback lo {
}
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN1 {
authoritative enable
subnet 10.0.0.0/23 {
default-router 10.0.0.1
dns-server 8.8.8.9
dns-server 1.1.1.1
lease 20000
start 10.0.1.10 {
stop 10.0.1.200
}
}
}
shared-network-name LAN2 {
authoritative enable
subnet 192.168.2.0/24 {
default-router 192.168.2.1
dns-server 192.168.2.1
lease 86400
start 192.168.2.38 {
stop 192.168.2.243
}
}
}
static-arp disable
use-dnsmasq disable
}
dns {
forwarding {
cache-size 10000
listen-on eth1
listen-on eth2
name-server 8.8.8.8
name-server 1.1.1.1
}
}
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 5010 {
description "masquerade for WAN"
outbound-interface eth0
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
unms {
}
upnp {
listen-on eth1 {
outbound-interface eth0
}
}
}
system {
analytics-handler {
send-analytics-report false
}
crash-handler {
send-crash-report false
}
gateway-address 192.168.2.254
host-name EdgeRouter-4
login {
user daan {
authentication {
encrypted-password ****************
}
level admin
}
}
name-server 8.8.8.8
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone UTC
