Hi,
I have an NAS connected via a switch to an Experia Box v10. When I transfer files to the NAS from a PC connected to the switch, the speed is close to 100 Mbps.
When I transfer a file from a PC connected via a switch or router in bridge mode to another port on the Experia, the speed is less than 10 Mbps.
I have reset all the devices, and KPN technical support referred me to the forum. The Internet speeds are fine.
I would appreciate any help.
Thanks.
Beste antwoord door Babylonia
Try other LAN-cables as well.
E.g. when one core (out of 8) is damaged, local speed shall sink form 1 Gig to 100 Mbps.
Can depend to devices connected to your switches, settings related to idle state and wake-up functions of devices, IGMP Snooping possibilities of switches and gear.
Normally a connection locally on your home-network from PC to a NAS, a maximum of about 110-112 MegaBYTE per/sec could be possible, or calculated to Megabit about 900 Mbps instead of a miserable speed of 100 Mbps. Not to mention less than 10 Mbps speed.
Maybe a handsome subject translated by Google see < THIS ONE >
Thanks for your help. The low speed is only over the router (with a direct connection). I tried all the connection options. I think to reset the router to default settings….
Try other LAN-cables as well.
E.g. when one core (out of 8) is damaged, local speed shall sink form 1 Gig to 100 Mbps.
+9Hi
+9Hi
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
